Reliable, safe and practical brand Keda packaging machinery gluing machine series products, can automatically glue paper, automatic temperature control, 24-hour timer. The suction device of the production line avoids bending and blistering of the powder paper. It adopts Feida suction paper for feeding, and uses hot melt adhesive (animal glue) for hygiene and environmental protection. It can be recycled to save costs, and the speed can be adjusted. This machine is mainly designed for the stop positioning after the paper has been glued, which can effectively prevent the conveyor belt from moving, positioning offset or misalignment to produce a large number of defective products. The stop time can be set arbitrarily. The machine adopts high-precision photoelectric and Color mark sensor control, accurate and accurate.
1. The paste machine is very noisy. Since the machine runs at high temperature for a long time, the lubricating oil of each transmission gear is easy to dry, resulting in loud noise. After repopulating, you can troubleshoot.
2. The motor rotates, but does not heat up. Usually a relay failure. It can be judged by measuring whether there is a 220V voltage across the RL. If there is no voltage or the voltage is too low, the relay does not suck or has poor suction. Most relays K are damaged or contact ablated. The relay should be replaced or the sanded contacts removed.
3. The gluing machine cannot maintain a constant temperature. Because the thermistor is in contact with the surface of the pressure shaft, friction occurs when the pressure shaft rotates. It will fall loose or become damaged over time and should be reattached and in contact with the pressure shaft surface. If damaged, replace with a new thermistor.